Oxo coffee grinder not working? Problems Fix & Repair

If your oxo coffee grinder not working, there are a few things that you can do to troubleshoot the issue. First, try to determine whether the grinder is plugged in and working. If it is, try moving the grinder around – if it starts working, the issue may be with the cord. If the cord is not the issue, you may need to replace the grinder. Finally, if all else fails, you can try troubleshooting the machine by reading the operator’s manual.

Read Also: How to clean iron cast skillet

Why is the oxo coffee grinder not working?

There could be a number of reasons why your oxo coffee grinder isn’t working. This includes problems with the machine itself, the grinds that are being put in, or the beans that are being used.

If the machine is working but the grinds aren’t reaching the Grinds container, then it may be because of clogged filters. To fix this, you’ll need to disassemble the machine and remove the filters. If there’s still no improvement, then it may be because of something wrong with the grinds themselves. In this case, you’ll need to replace them with fresh grinds.

If the beans are not being ground correctly, then it’s likely that they’re too wet or too dry. To fix this, you’ll need to adjust the water flow accordingly. Too much water will make them too wet; too little water will make them too dry.

Troubleshooting tips for oxo coffee grinder not working

If your oxo coffee grinder isn’t working, here are some troubleshooting tips to try:

  • Check the power cord. Make sure that the power cord is plugged into an outlet and into the coffee grinder.
  • If the power cord is plugged in and it still doesn’t work, try a different outlet.
  • Check to see if there’s anything blocking the fan or motor. Remove any pieces of furniture or other objects that might be in the way.
  • Clean out any debris that may have built up inside the coffee grinder. Use a brush to clean out any buildups of grounds, dust, or hair.
  • Try switching out the grinding wheel. If one wheel is damaged or worn out, it can cause the whole machine to malfunction.

Common causes of the grinder not working

There are many possible reasons why your oxo coffee grinder might not be working. Here are a few of the most common causes:

  • The motor may be overheating and failing. Make sure that the fan is turning and that there isn’t any debris blocking the fan or blades. If the problem still persists, it may be time for a new motor.
  • The grinding mechanism may be jammed or defective. Clean the grinder thoroughly and make sure that all the parts are properly installed and secured. If the problem still persists, it may be time for a new grinder.
  • The burrs on the grinder blade may have become worn down, causing them to jam in between grinds. To fix this, you’ll need to replace the blade.

Fixing the issue with the oxo grinder

If your oxo coffee grinder is not working, there are a few things that you can do to try and fix the issue.

The first thing that you should do is check the cord connection. Make sure that it’s secure and not pinched or twisted. If the cord is properly connected, then the next step is to check if the power supply is working. Make sure that the outlet is switched on and that the plug is inserted into the correct socket. If everything looks okay, then it’s likely that the grinder itself is not working.

To test this, you can try turning it off and on again, or resetting it by pressing several buttons at once for about five seconds. If none of these solutions work, then you may need to take it in for repair or replacement.

How to troubleshoot other common appliances

When troubleshooting a common appliance, first check the appliance’s manual. If it’s not clear how to fix the problem, there are several things you can try:

  • It is also possible that the problem may be caused by a fault circuit board, or other more complicated problems such as failure to properly install the appliance correctly.
  • If the problem is caused by bad wiring or a fuse, check and replace it. If the circuit board is faulty then get it replaced.
  • If the machine is overloaded (too much water, for example), then turn off the water and wait for it to run out of excess water before you re-start it.
  • If any of these do not work then call an electrician to help you troubleshoot the issue.

Oxo coffee grinder settings

If your oxo coffee grinder is not working, it may be because the settings are incorrect. To fix this, follow these steps:

  • Remove the hopper and descaler by unscrewing them from the top of the grinder.
  • Wash them in warm, soapy water and dry them off.
  • Set the grind size to fine.
  • Replace the hopper and descaler and screw them onto the grinder in the correct order.
  • Press down on the hopper to ensure that it is seated properly.
  • Turn on your grinder by pressing and holding down both of the green buttons at once for two seconds. The red light should turn on to indicate that it is functioning properly.

Oxo burr coffee grinder not working

Oxo burr coffee grinders are some of the most popular coffee grinders on the market. They’re known for their durability and performance, which is why so many people choose them.

However, if you’re having trouble with your oxo burr grinder not working, there’s a chance that it’s just out of warranty. In this case, you’ll need to either replace the grinder or take it to a professional. It’s not worth risking damaging your machine or investing in a defective product. If your grinder is within the warranty period, you can usually fix it yourself by following these steps:

  • Unplug your machine and wait a few minutes so that any residual power is dissipated. This will help prevent damage to the device when you try to repair it.
  • Remove the bottom housing of the grinder by gently prying off the two tabs with a flathead screwdriver (see photo below). Be careful not to remove too much plastic, or else you’ll end up having trouble replacing it later on. If necessary, use a rubber mal let to tap the housing gently until it comes loose.
  • Remove the burr assembly by gently unscrewing it from the main shaft. Be careful not to lose any of the screws or springs, as they’re usually replaceable.
  • Clean all of the parts with a cloth and rubbing alcohol – make sure to get into all of the nooks and crannies.

Oxo coffee grinder scale not working

If you’re having problems with your oxo coffee grinder not working, it may be because the scale is not registering correctly. To fix this, you’ll need to adjust the calibration of the scale.

To do this, first make sure that the power is off and then remove the cord from the grinder. Next, locate the two screws that secure the base of the scale to the machine. Once you’ve located these screws, use a Phillips head screwdriver to remove them. You’ll now need to unscrew the scale itself. After it’s been unscrewed, gently lift it out and set it on a flat surface. Now, make sure that all of its pins are lined up correctly in front of you and re-screw it into place using the two screws that you removed earlier.

Finally, plug in your grinder and test it out to see if everything is working properly now.

Oxo coffee grinder timer not working

If you’re having trouble setting your oxo coffee grinder timer, then there are a few things you can do to troubleshoot the issue.

First, make sure that you have the right type of oxo coffee grinder timer. There are two types – an electronic timer and a dial timer. If you have an electronic timer, then make sure that it’s turned on and working correctly. If it isn’t, then you’ll need to replace it.

Next, try resetting your oxo coffee grinder timer by pressing the button for a few seconds until the green light turns off. If that doesn’t work, then you may need to take your oxo coffee grinder apart and check if there’s something blocking the button from working properly.

Finally, if none of these solutions work, then you may need to call up an expert to help with your issue.

Reset oxo coffee grinder

If your reset oxo coffee grinder is not working properly, there are a few simple steps that you can take to get it back up and running again.

  • Make sure that the coffee beans are properly ground. If they’re not, the grinder won’t be able to correctly grind them and produce the desired results.
  • Clear any blockages in the machine by using a plunger or a vacuum cleaner.
  • Check to see if there is any dust or dirt inside of the grinder itself. If so, remove it using a brush or a cloth.
  • Replace any worn parts with new ones, if necessary.

Check Out Too: How to cook ribeye steak in a pan

Oxo coffee grinder button not working

There’s a chance that the button on your oxo coffee grinder is not working. If you’re unable to turn it, then you may need to replace it.

To do this, first remove the cover by unscrewing the four screws that hold it in place. Next, take a look at the button and see if there’s anything wrong with it. If there is, you’ll need to replace it.

Once you’ve replaced the button, reattach the cover by screwing it back into place. Be sure to tighten all of the screws properly before doing so – otherwise your grinder might not work properly again.


We hope that this article has helped you in solving your problem regarding oxo coffee grinder not working. You can also use the manual method to open it and clean its inner parts. After that, start using it again to grind delicious coffee beans.